Bike Nerds Will Bike Nerd
I have received a couple of confused inquiries from yesterday’s SBTISAOAF, so I figured I had best follow up ASAP. I want to avoid anyone ripping out to invest their own treasure in an MXg guide for their ISCG single-speed project.
I would not recommend buying an HP+I (High Pivot & Idler) specific MRP MXg chain guide for your single-speed conversion. It requires clockable ISCG tabs, and even then, it’s huge and lacks the adjustment of other options.
What I would highly recommend is MRP’s G5 SL 2-Bolt guide. I know multiple folks using them with great results, and I have as well. It’s a fantastic chain guide for this application.

Lately, I’ve been into upcycling my own ISCG #1FG options. On my Enigma, my Freeride BMX, I’ve been running an ancient {pre-clutch derailleurs and 1x} MRP 2X guide just with a single jockey wheel installed.
I bought the 2X guide, which includes two jockey wheels, for very little treasure on the buy-and-sell {who needs a chain guide for a double chain ring?} and it works awesome. My goal with this setup was to show that experimenting with ISCG one-speeding doesn’t have to require much investment. Buy a cog and spacer kit, sort out an old ISCG chain guide, shorten the chain, and ride.
Okay, it’s a little more complicated in terms of figuring out gearing. But I’m always happy to help with that if you want to drop me an e-mail {I swear, I do answer them all, most of the time, eventually. If you haven’t heard from me in a few days, feel encouraged to send a refresh}.



So, what’s with project MXg?
There are a ton of hardtails out there with ISCG tabs, and most of the ones that don’t have them use a BSA bottom bracket, so, like The Clairebarian’s Chromag, it’s easy enough to add an ISCG adapter. This is an easy way to go #1FG.
I despise derailleur-hanger mounted tensioners, and I love single-speeding, and I figure there are piles of hardtail folks {okay, a few} who would love to try single-speeding but don’t want to invest in a new frame with drop-out tensioning.
Or, money aside, they simply love their current hardtail frame, and it could even be a case that they can’t find their preferred geometry in an option that has sliding dropouts.
Whatever the reason, using an ISCG mount chain guide opens up the option of single-speeding to almost anyone with a hardtail {my ArctuHawk with its PF92 BB and lack of ISCG tabs is an example of the exception}.


Anywho, with the MXg, MRP has put a large focus on how efficiently and quietly the chain runs through the guide. This is because the HP+I trail bikes and enduro bikes folks are running these guides on need to pedal as smoothly as possible. They’re not DH rigs where really only chain retention matters.
Many HP+I riders actually remove their lower guide to improve pedaling, but this results in faster chain ring wear and a significantly increased prospect of derailment because the chain is interfacing with so few teeth on the chain ring.
The MXg with its so-smooth-spinning and 14x ‘micro-tooth’ roller, which is a sort of jockey wheel and roller hybrid, does a beautiful job of its intended application. My thinking is that a single-speed specific version, designed for a stand double-diamond hardtail frame, with maybe a slightly smaller roller for aesthetic reasons, could be an amazing one-speed-marketed product.

Design the back plate around a regular ISCG and chain stay position, rather than the elevated stays on an HP+I bike, make the jockey-roller a 12t instead of 14t, reposition the bash guard {love having a bash guard} and make an MX#1FG.
Is the demand there, really? I don’t know. But it feels like more and more people are interested in joining the 50,000:1 club these days, and not everyone is going to go out and grab a fresh Unit, or Stooge, or commission a custom so they can have Enigma geometry with sliding dropouts.
I can’t wait to ride my MXg setup and write more. I currently have it rigged up 26x18t, but, without going to a half link chain, I have a couple of other gearing combos I’m also going to try. The Engima loves to go! I’ve also noticed that the S5 roller is available on its own, so there may be some hybrid experiments in my future.

Yeah, so. To come full circle. If you’re looking to one-speed your hardtail using an ISCG guide, I would start with either the MRP G5 2-bolt, or, in the buy-and-sell, looking at old guides. Just remember ISCG and ISCG-05 aren’t the same thing, and a lot of chain guides have SHIiiiiiiiiiiT jockey wheels, so be prepared to upgrade for the best efficiency.
Hope this is helpful!
Welcome to MEATengines, I hope you enjoyed this piece. If you did, please consider buying me a coffee. Any questions, concerns, or comments; feel encouraged to drop me an e-mail, or join us at r/MEATengines.

